Produkte

	NEW




	The most importend news about our products



	NEW
	March 2011 Distribution Porometer according pressure scan method: POROLUX 100 and POROLUX 100NW for nonwovens.
	March 2011 Distribution PSA - Pressure Swing Adsorption from L&C Science for research and development on laboratory scale.
	February 2011 Distribution Porometer POROLUX 1000 now with 3 built in sample holders. Options Hydrohead, liquid permeability and sample holders for hollow fibres.
	January 2011 Distribution Porotec specialises its particle analysis and becomes distributor of Brightwell Flow Microscopes, well renowned in Pharmacy, for Germany , Austria and Switzerland.
	September 2010 Porotec Workshop XV. Workshop 16.-17. November 2010.
	September 2010 Distribution: Distribution of Amebis stability test systems, controlled storage of pharmaceuticals, food and other materials in seperate micro climate chambers with wireless monitoring.
	December 2009 Distribution: POROTEC is now distributor of the humidity generators RH-200 from L&C Science USA.
	November 2009 Distribution: POROTEC is now distributor of the Zeta Potential Analyser ZetaProbe from Colloidal Dynamics USA.
	November 2009 Distribution: Extension of the sales territory to Scandinavia and Turkey for the ThermoScientific products.
	September 2009 POROMETRY: In addition to the Porometer 4 the advanced capillary flow porometer Porolux 1000 from Benelux Scientific is extending our program. The Porolux 1000 is used for the determination of the bubble point, the pore size distribution and permeability of materials with through pores like membranes and filters in the range from 14nm up to 300痠.
	February 2009 PASCAL POROSIMETER: The new Software SOLID is now available. Presentations in April and May, view EVENTS. Order more informations under info
	December 2008 TPDRO: Improved sensitivity The unrivalled sensitivity of our TPDRO is now improved remarkably in reducing the baseline noise level to +/-1mV
	December 2008 Porotec is now distributor of porometer 4, a capillary flow porometer from Benelux Scientific / B The *porometer 4* is used for the determination of the pore size distribution and permeability of materials with through pores like membranes and filters in the range from 50nm up to 300痠
	November 2008 New software for PASCAL Porosimeter with pressure-volume online control and advanced calculation models Available 2. Quarter 2009
	October 2008 New TPDRO oven for external multi sample preparation
	October 2008 POROTEC becomes the dealer of the product line VAPOR SORPTION ANALYSIS from TA Instruments
	May 2008 New Eyetech Particle Analyser from Ankersmid / NL� Laser- and Image analysis in one instrumen愒
	December 2007 Online Catalogue goes online
	August 2007 TPD/R/O Pretreatment System The new TPDRO Pretreatment System can handle up to four samples parallel.The instrument has four Gas inlets and four Gas outlets. The sample holders can be easily connected with Gas-Quick connectors as in the TPDRO instrument. More... August 2007 DVS Intrinsic � Device for Measurement of Dynamic Water Vapor Sorption November 2006 Latest version of Pore-Cor vers. 6.0 launched at XIII. Workshop, software for 3-dimensional display and extended analysis of your PASCAL porosimetry data. October 2006 New PASCAL 140 Firmware, easier and faster use of the low pressure porosimeter. February 2006 For all existing CIS50, CIS100 and DSA10 systems are now hard- and software upgrades available. All upgrades are based on the Eyetech standard. December 2005 New improvements carried out on TPDRO units produced from December: Better mass flow controller from MKS- better stability New design loop valve for puls chemisorption experiment.-higher resolution All quick fit connectors now are in stainless steel. November 2005 DVS HT High Throughput Multisampler: August 2005 Pore-Cor brochure is now available. June 2005 New software 2.3 and firmware 2.2 for TPDRO now available. April 2005 New Poster for Sorptomatic and pascal porosimeter are now available. March 2005 New software and firmware upgrades for Qsurf expand its analytical capabilities and improve the ease of use. November 2004 Pore-Cor software package is available for data evaluation with PASCAL Porosimeters from ThermoElectron Pore-Cor Research Suite is unique, world-leading software that will enable you to Gain a better understanding of how liquids and gases behave in pores Provide cost-effective enhancement of experimental pore-structure investigation methods Get more information from mercury porosimetry and water retention experiments View pore-fluid behaviour in a virtual reality environment Optimise porous materials to improve properties for applications such as oil recovery, paper coating, catalysis, impregnation, sinter strength and soil structure November 2004 XII. Workshop on the characterization of fine powders and porous solids On 16.-17. November the XII. Workshop about the characterization of fine powders and porous particles takes place in Bad Soden. There will be presented lectures and posters of participants from industry, universities and research institutes. The workshop sessions will give the possibility to discuss the following topics: Comprehensive Procedures and Methods Mercury-Intrusion-Porosimetry Physisorption and Chemisorption Characterization of Catalysts Particle Size determination Microstructure of Building Materials, Activated Carbons, etc. The workshop is now established since 24 years, and an attending exhibition represents an overview of the current techniques and methods in the area of the characterization of porous solids. October 2004 NEW: DVS Advantage February 2004 PASCAL Porosimeter conform to the "Pressure Equipment Directive PED" EC 97/23 April 2003 NEW: DVS Software according to FDA 21 CFR Part 11 regularities November 2002 POROTEC extend their product line by the Particle-Analyzers from Ankersmid /NL With the both Particle analyzers CIS 50 and CIS 100 it is possible to determine both, particle size and shape, to give the best possible characterization of unknown samples. With the large variety of additional accessories it is possible to optimize the analysis technique for every system. November 2002 XI. Workshop on the characterization of fine powders and porous solids On 14.-15. November the XI. Workshop about the characterization of fine powders and porous particles takes place in Bad Soden. There will be presented lectures and posters of participants from industry, universities and research institutes. The workshop sessions will give the possibility to discuss the following topics: Comprehensive Procedures and Methods Gas- and Vapour-Sorption Mercury-Intrusion-Porosimetry Synthesis and Characterization of new Materials Microstructure of Building Materials Characterization of Catalysts and Activated Carbons The workshop is now established since 22 years, and an attending exhibition represents an overview of the current techniques and methods in the area of the characterization of porous solids. April 2002 SMS introduce the humidity generator VGI 2000